Facebook

Tube filling sealing machine

What is a tube filling and sealing machine?

A tube filling and sealing machine fills a tube from the open end, seals the tail, and — on most models — stamps the batch code into the seal. The tube is held upright in a rotating turret, or placed by the operator on the semi-automatic models, so the product is dosed before the tail is closed. It packs toothpaste, cosmetic cream, ointment, glue, sealant and paint in aluminum, plastic and laminated tubes.

Choose the seal by tube material first

The tube material decides the sealing head, and the sealing head decides which models can run your tube. Aluminum is sealed by a heated jaw that crimps and folds the tail; plastic and laminated tubes are sealed ultrasonically, without a heated jaw. Where a model lists all three materials, it is supplied to run both methods — switching between aluminum and plastic means changing the sealing device, not adjusting a setting.

Tube material Sealing method RIFU models
Aluminum tube Hot-jaw seal with crimp and fold Automatic aluminum tube machine, 00427 · RF-FWF · RF-FWD · semi-automatic 00424
Plastic, laminated and soft tube Ultrasonic direct-press seal Automatic ultrasonic 00429 · semi-automatic 00423 · 00378 with water chiller
Aluminum, plastic or laminated, on one machine Either method — the sealing device is changed over 00430 with steel stamping · 00125 · RF-FWA · RF-FWC · semi-automatic RF-FWB

Automatic or semi-automatic?

On an automatic machine the tubes are loaded from a magazine and travel through filling, sealing and coding in one cycle, so the operator supervises rather than handles each tube. On a semi-automatic machine the operator places and removes each tube, which suits short runs, samples and small batch production.

What the filling accuracy figure means

The accuracy is quoted as a percentage of the fill volume, and it depends on how the product flows. ±0.5–1% of a 100 ml fill is 0.5 to 1 ml per tube; on a 5 ml fill the same percentage is a fraction of a millilitre. Thick paste doses more predictably than a thin lotion, which is why the specification carries the viscosity condition.

What do you need to send for a quote?

Six things: the tube material, the tube diameter and length, the fill volume, the product viscosity, the output you need per minute, and whether the tail has to carry a batch code. A tube sample and a product sample settle the sealing method and the dosing system before quoting.

Frequently asked questions about tube filling machines

Which sealing method does my tube need?

Aluminum tubes are sealed with a heated jaw that crimps and folds the tail. Plastic and laminated tubes are sealed ultrasonically. The tube you buy decides the method, so it is the first thing to fix before choosing a model.

Can the machine stamp a batch or expiry code?

Every model stamps the batch number and expiry date by embossing them into the tube tail with a steel die. On an aluminum tube the die presses into the folded edge after crimping; on a plastic or laminated tube it presses into the seal while the tail is still hot from sealing. The mark is formed in the material and needs no ink. 

Automatic or semi-automatic — which one should I choose?

Choose semi-automatic when the run is short, the product is still in development, or the tube is placed by hand for a reason such as a very small diameter. Choose automatic when the same tube runs continuously and one operator should be able to supervise the machine instead of loading it. 

What fill accuracy can I expect?

±0.5–1% of the fill volume on the automatic models, and ±1% on the semi-automatic ones, with the condition that it depends on product viscosity. A thicker paste holds a tighter tolerance than a thin liquid at the same volume.

What do you need from me to quote?

The tube material, diameter and length, the fill volume, the product viscosity, your target output per minute, and whether a batch code is needed on the tail. A tube sample and a product sample remove most of the remaining questions.

We use cookies to Improve your online experience. By continuing browsing this website, we assume you agree our use of cookies.  Cookie Policy
@media (max-width: 768px) { input, textarea, select { font-size: 16px !important; } }